ASE 1310nm Light Source Specification
NO. 1 Service NO.1 Quality  
1310nm ASE Light Source  
1300 and 1550 and Low DOP 1250-1650nm ASE Light Source (above)  
Description:  
1300nm/1310nm ASE Broadband Light Source, based on Amplified Spontaneous Emission (ASE) laser diode (LD).  
Center wavelength 1300nm or 1310nm, operating wavelength range 1250 to 1350 nm, 1250 to 1370 nm, etc. Output  
power 5-10 mW, etc. Spectral density -20~-10 dBm/nm, Degree of Polarization (DOP) =5%. OEM model is well  
available on customer’s special request.  
Applications - 1300nm /1310nm ASE Light Source:  
Optical fiber sensing  
PLC, CWDM, DWDM, Film testing  
Optical fiber grating testing  
Optical fiber measurement equipments  
Fiber Optic Gyroscope (FOG)  
Optical coherence tomography (OCT)  
Features - 1300nm /1310nm ASE Light Source:  
High output power  
High spectral stability  
Broadband spectrum output  
Low noise  
Low polarization and low coherent  
Specifications - 1300nm /1310nm ASE Light Source:  
Parameters  
ASE-1300  
1250~1350, etc  
5~8, etc  
Operating wavelength (nm)  
Output power (mW)  
Spectral density (dBm/nm)  
-20 ~ -10  
mar  
k
et@acfiber.com  
NO. 1 Service NO.1 Quality  
Spectral stability (dB)  
=±0.05(5 min)  
=±0.01 (5 min)  
=±0.03 (8 hour)  
=5%  
Output power short-term stability (dB) 1  
Output power long-term stability (dB) 2  
Degree of Polarization (DOP)  
Pigtail fiber  
SMF-28  
Connector type  
FC/PC, FC/UPC or FC/APC, etc  
Operating temperature ()  
Storage temperature ()  
Relative humidity (%)  
0 ~ +65 (-20 ~ +65 available)  
-20 ~ +70  
20~80  
110/220V AC, +5V or +3.3V DC; >500mA; V1%  
10 W  
Power Supply  
Maximal Power Consumption  
Dimension (L×W×H, mm)  
90×70×19(Module), or 320×220×90(Desk-top)  
Remark: Stability is tested at room temperature 25±2after pre-heating 30 minutes.  
1. Test condition: fixed temperature, CW.  
2. Test condition: temperature variation ±2, CW.  
Typical Spectrum  
mar  
k
et@acfiber.com  
NO. 1 Service NO.1 Quality  
Ordering Information - 1300nm /1310nm ASE Light Source  
ASE-1300 Package Type Output Power  
Fiber Type  
Connector  
5=5mW  
M=Module  
S=SM Fiber  
P=PM Fiber  
etc  
FC/UPC  
FC/APC  
etc  
7=7mW  
D=Desk-top  
etc  
mar  
k
et@acfiber.com  
            market@acfiber.com